If you are talking about a custom built frame kit that can take a real "Big-Bad-Fat-Tire" you must be talking about our "Super-Ass" frame kits. The frames used in these kits are our approved Softail style frames with 1 1/4" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1/8" wide final belt drive you can even mount a 260 tire on a 9" wide rim. Use a 132 tooth belt on 32/65 and 32/66 pulley combinations or a 133 tooth belt on 32/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4" to 8" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.
Article number | Description | Retail price | Add to cart |
---|---|---|---|
730503
|
Extra wide swingarm 2008-2017 for up to 250 tires on 8 1/2" rim (approved) | £985.21 | |
236872
|
Frame only |
|
|
237653
|
Stainless pivot bolt with chrome spacers |
|
|
782023
|
Swingarm bearing with circlip, each, Evolution Softail 1984-1999 (OEM 9076) | £19.54 | |
700829
|
Swingarm pivot shim (three needed) | £2.70 | |
701498
|
Swingarm pivot shim (four needed) | £0.71 | |
730525
|
Rear wheel axle for Extra Wide swingarm 2008-up (25mm x 410mm) | £106.36 | |
742876
|
Stainless Steel inner swingarm fender 2008 thru 2017 | £39.83 | |
238765
|
Shock protection plate |
|
|
236491
|
Primary spacer ring with hardware | £112.44 | |
236490
|
Off-set transmission plate, +25mm | £31.09 |
Article number | Description | Retail price | Add to cart |
---|---|---|---|
722274
|
Curved fender struts, without offset | £89.19 | |
090478
|
11" Wide Softail rear fender | £187.79 | |
700950
|
Billet aluminum fender struts |
|
|
700951
|
Raw steel fender struts |
|
|
346231
|
Crankshaft extension 25mm 1970-1990 | £46.11 | |
346210
|
Crankshaft extension 25mm 1991-2006 | £49.08 | |
346212
|
Motor sprocket shaft nut +25mm | £20.62 | |
346214
|
Motor sprocket shaft nut +25mm | £23.01 |
Recommended Retail Prices include 20.00% sales tax.
Prices exclude shipping, import duties and installation.
Prices are based on EUR to GBP interbank rates obtained daily. The interbank rate is the rate that banks trade currency to each other. These prices must be used as a guide.